Description
Single Channel VIS Absorption Probe
AS56-F is a probe for direct installation into pipelines and vessels measuring VIS light absorption of various liquid samples. Optical path length can individually configured to meet the process control requirements.
Used For
- Color scale:
- CU (concentration units)
- Color monitoring
- of CIP processes
- for interface detection in beverage production
Typical Applications
Turbidity of White Water
Brewing Yeast Management
The AS56-F is a precision absorption probe, which is designed for direct installation into pipelines and provides accurate concentration measurements with remarkable repeatability, linearity and resolution. It is typically used in food and beverage applications to allow cost-effective measurements. The AS56-F uses a specific wavelength of 430 nm in the visible spectrum to measure color in liquids with little or no turbidity. Its lowered power design allows for up to four AS56 series sensors to be multiplexed to one C4000 converter / transmitter.
| AS56-F | ||
|---|---|---|
| Schematic | 
No window gaskets used |
|
| Measurement | ||
| Measurement principle | 1- Channel Absorption of light | |
| Measurement wavelength(s) | AS56-F:430 nm | |
| Detector(s) | 1 silicon photodiode (hermetically sealed) | |
| Measuring Range | AS56-F:
any measuring range between 0 – 0.05 to 1.5 CU |
|
| Optical path length | 5 or 10 mm | |
| Calibration | CU (concentration units) application specific calibration | |
| Light source | special incandescent tungsten lamp 5.0 V DC, 450 mA
typical life span: 3 to 5 years (25,000 to 40,000 hours) |
|
| Resolution | < ± 0.5 % of respective measuring range | |
| Repeatability | < ± 1.0 % of respective measuring range | |
| Linearity | < ± 2 % of respective measuring range (specific to application) | |
| Protection | all optical parts have an IP rating of IP65 or higher | |
| Process Adaption | ||
| Material | wetted parts: stainless steel 1.4435 (SS 316 L)
surface: electro-polished Ra < 0,8 μm housing: stainless steel 1.4571 (SS 316 Ti) |
|
| Port connection | thread G1-1/4 in., ISO 228/1 for port AS25 (similar Ingold-port)
diameter: 25 mm ( D= 25 H7) O-ring groove for 30 mm and for 60 mm port length |
|
| Port gasket | O-ring 18.64 x 3.53 mm EPDM (FDA / USP Class VI) | |
| Insertion depth | 35 mm (1.38 in.) + OPL at a port length of 60 mm (2.36 in.) | |
| Process pressure | 10 mbar to 10 bar (0.15 psi to 145 psi) | |
| Windows | Sapphire (seal-less) | |
| Installation accessories |
|
|
| Temperature Ratings | ||
| Process temperature | permanent:0 – 90 °C (32 – 194 °F)
peak 60 min/day:0 – 100 °C (32 – 212 °F) |
|
| Ambient temperature | operation:0 – 40 °C (32 – 104 °F)
transport:-20 – 70 °C ( -4 – 158 °F) |
|
| Pressure and temperature ratings specified herein may be subject to limitations – see instruction manual. The appropriate choice of material for all wetted parts is the sole responsibility of the user. Data given are subject to changes without prior notice. | ||
